|
Hardware | ||
|
Software | ||
|
Regulatory Information |
| Physical specifications | ||
|
Dimensions (hxwxl) |
6x18.5x26 cm |
|
|
Weight |
1.75 kg |
|
|
Power cord length |
2 meter |
|
| Electrical specifications | ||
|
Voltage |
100-240 V AC, (47-63 Hz) |
|
|
Current |
0.2 A |
|
|
Power consumption |
10 Watt |
|
| Environmental specifications | ||
|
|
Temperature |
Humidity |
|
Operating |
0° to 40° C |
20 to 80% (relative humidity) |
|
Storage |
-40° to 60° C |
15 to 95% (no condensation allowed) |
|
Transit |
-10° to 50° C |
10 to 90% (no condensation allowed) |
| Ethernet interface | ||
|
|
10/100Base-T |
RJ 45 female socket, 10/100 Mbit/s Ethernet |
| Wireless interface | ||
|
|
2 x PC Card Type II slot |
|
| Serial interface | ||
|
|
RS232 Connector (will be supported in a future release) |
|
| TrueMobile AP1000 operating software | ||
|
wpntxxx.bin |
Factory installed operating software for the TrueMobile AP1000 This software, that is loaded into the FlashROM of the access point, controls its features and functions. The 'xxx' in the file name refer to the version level of the software. When new features and functionality become available, you can upgrade the TrueMobile AP1000 by uploading the latest software as described in this guide. |
|
| TrueMobile AP Manager | ||
|
wman_ap.exe |
Configuration and management software for TrueMobile AP1000s This software runs on the Microsoft® Windows® 95, Windows 98, Windows 2000, and Windows NT® v4.0 operating systems. |
|
Dell is not responsible for any radio or television interference caused by unauthorized modification of the device, or the substitution or attachment of connecting cables and equipment other than specified by Dell. The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user.
Federal Communications Commission (FCC)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Information to the user
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Industry Canada (IC)
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations
Cet appareil de la class B respecte toutes les exigences du Reglement sur le materiel brouiller du Canada
EU Declaration of Conformity
This product conforms to the relevant regulatory standards following the provisions of the European Council Directives 73/23/EEC (Low Voltage Directive) and 89/336/EEC amended by 92/31/EEC (EMC Directive):
Safety : EN60950/IEC950
EMC: EN55022/CISPR22 Class B, EN61000-3-2/EN61000-3-3, EN55024
VCCI
English Translation:
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.